Page Comparison

...

Users have the flexibility of adding Custom Fields to TS Attributes. These can be specified at the global level or at the Project Level.
The following Attributes are available by default
- ID: Unique Unique for the project.
- Serial No: This This is shown as #
- Action: Description Description of Test Step
- Attachment for the Test Step. Typically : Typically this can contain reference images etc.
- Expected Results: This field can be used to specify the expected results of a test step.
- Internal Sources: This field specifies Internal Sources of the test step. Just click on "Internal Sources" column against a test step row to enter its Internal Sources. (available from RMsis 1.8.9.4)

Custom Attributes

The Project Manager / Lead can define additional Custom Attributes for Test Steps at the project level OR Tool Administrator can define Custom Attributes for all projects of this instance. The supported Custom Fields are:
- Text
- Integer
- Real value
- Date
- Single select list
- Multi select list
- Rich Text Area
- Hierarchical View
- JIRA Data
These can be defined either at a project level OR for all projects of this instance
- Test Case Configuration
- Project Configuration and Administration

...

Edit Actual Results and Status
Attach a file / image
- Note : In RMsis 1.8.8-r301 and earlier versions of RMsis, a file can be attached in the "Test Step Attachments during execution" field only if the "Status" has been set OR data has been entered for "Actual Results" field. (applicable from RMsis 1.8.3 onwards)
Show / Hide Table Columns
The Test Case Status will be auto computed using the conditions specified for this instance of RMsis, using the feature "Auto Compute Test case status from Test steps" available in the Test Runs Tab.

Image Added

In RMsis 1.8.8.2-r304 and later versions of RMsis, the status of test cases within a test run will be automatically computed based on their test steps status using the conditions specified for this instance of RMsis when the test step window is closed.
- By default, this feature is disabled.
- In order to enable this feature,
  - Switch to RMsis
.

...

- - Administration > Configuration > Application
  - Scroll down to "Auto Compute Test Case State" section.
  - Enable the checkbox "Auto compute Test Case status on Test Step window closure"
  - Image Added

This feature can be used to bulk update status of multiple test steps.
In order to bulk update status of multiple test steps,
- Select the test steps and then click on "Reset Status To :"
- A dropdown menu containing the possible status values will be displayed.
- Select the appropriate status value.
- Image Added

RMsis provides an option to automatically compute the status of a Test Case, based on the statuses of it's Test Steps.
The user has an option to override the computed status of a Test Case.
The rules can be specified as a global configuration under RMsis > RMsis Administration > Application Configuration > Status Computation Rules OR a project configuration under RMsis Home > Project Configuration.
The rules can be specified as a set in the following format
- IF
  - STATUS OF Any TS | All TS
  - EQUALS Pass | Fail | Pass with Exception | Blocked | ???
- THEN
  - SET STATUS of TC to
    - Pass | Fail | Pass with Exception | Blocked | ???

...

Image Added

New status computation rules can be created by following the steps mentioned below :

Click on the Any/All column of the first row in table and select an option.
Image Added
Now click on the cell in the Test Step Status column and select an option.
Image Added
Now click on the cell in the Test Case Status column and select an option.
Image Added
The new status computation rule has been created. Click on the Enable check box to enable this rule.
Image Added

Versions Compared