Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Enable Rich Text in Summary Field (available from RMsis 1.8.8.4-r310 and later versions)

In order to enable Rich text in "Requirement Summary" field,

  • Switch to RMsis Administration > Configuration > Application

  • Enable the "Enable Rich Text in Summary Field" checkbox available under the heading "Summary Field".

Configuring Requirement Approval Workflow

The Requirement Approval Workflow can be configured by clicking on the option provided.

A detailed description of the functionality can be found at Requirements Approval Workflow

Configuring Default Attribute Options

  • From RMsis 1.5.1 onwards, users have an option to reconfigure the Default Attribute Options for Requirements.
  • On the "Requirement Configuration Page", all default options (which can be configured) are displayed.
  • User will have an option to
    • Add Option
    • Edit Option, buy simply clicking on the option.
    • Delete Option
      • In case of Delete, the system will automatically prompt the user to map the (existing) assigned values.
  • A sample for a Configurable Attribute is shown below :

 

Function Attributes

  • Weight
    • The options will sorted for weights from "High to Low".
    • Even though there are no limitations imposed, the default convention is to use the range between 0 - 10
    • The weights are planned to be used in future for "Computed Fields"; even though they do not have any significance at the moment.
  • Default
    • This specifies the default value assigned to a newly created Requirement.

Configuring Effort and Size Units

The administrator can set the effort and size units to the following possible values:

Effort

  • Man Weeks
  • Man Days
  • Man Hours
  • Man Minutes

Size

  • Function Points
  • Feature Points
  • Story Points

Defining Custom Attributes for Requirements

  • RMsis provides a table, which can be used for managing custom fields for Requirements.
  • These custom fields will be applied globally to all projects.
  • These attributes can be configured for display in the Planned Requirement Data Table and are also included in the PDF reports generated for Planned Requirements.

Custom Field Attributes

A custom field has the following attributes:

  • Custom Field Name
    • This field specifies name of the custom field.

  • Field Type

    • This field specifies the field type of the custom field.

    • Just click on "Field Type" column against a custom field row to enter its field type.

    • Possible values for this field are

      • Text

      • Integer

      • Real value

      • Date

      • Single select list

      • Multi select list

      • Rich Text Area
      • Hierarchical View
      • JIRA Data

  • Field Unit

    • This attribute specifies the unit of the custom field.

    • It is only applicable for "Text", "Integer" and "Real value" type custom fields.

  • Field Options
    • This attribute specifies the field options for the custom field.
    • It is only applicable for "Single select list" and "Multi select list".
    • The options can be entered by clicking on respective cell.
    • By default, a blank option is added to the list; this is displayed as "—".
  • Editable
    • Editable flag when set, implies that this custom field can be modified, even after the Requirement has been committed.

Custom Field Operations

The following operations can be performed on this table:
  • Add Custom Field
    • A new custom field can be created by clicking on the first row of the table under the "Custom Field Name" column labeled "< Enter new Custom Field >".

  • Edit Custom Field

    • A custom field can be edited simply by clicking on it.
    • Note: Once a custom field is associated with some requirements,
      • then its field type cannot be altered
      • and associated field options cannot be deleted
  • Delete Custom Field(s)
    • Custom Field(s) can be deleted in the following two ways:
      • First select custom field(s) and then click on "Delete Custom Field" button to delete them.
      • By selecting context menu item "Delete Custom Field" to delete a single custom field.
    • However, if a custom field is associated with some requirements, then the system will prompt a message and confirm deletion from the user.
  • Reorder (Available from RMsis 1.8.9.2 and later versions)

    • This functionality can be used to reorder field options for a custom field.

    • It is only applicable for custom fields of type "Single select list" and "Multi select list".

    • In order to reorder field options for a custom field,
      • Click on the cell corresponding to the "Reorder" column for the custom field whose field options need to be reordered.
      • A panel "Reorder Options" will open up using which field options can be reordered (drag and drop to move/reorder field options).
      • Click on Save button after reordering the field options.
  • Enable
    • A custom field can be enabled by clicking on the check box on the extreme right.
    • Once a custom field is enabled, it appears as part of Requirements.
    • If checked then any new projects created in JIRA will be having these fields enabled by default. Project manager has to explicitly disable those fields in their projects.

Deleting a Custom Field Option

A custom field option can be deleted by clicking on the Field Option and subsequently on the Delete Icon shown against the option. In case the option is already associated with an entity, the following dialogue box appears, which enables the user to specify an alternative option for all the linked entities.

Note

Context Menu is accessible by right clicking on any table row. Operations defined in context menu will be performed on that row.

Configuring Mail Notifications

Mail Notifications can be configured for

  • Requirement State Changes
  • Requirement Attribute Changes

and are sent to

  • Manager
  • Assignee for the Requirement.

Exporting Requirements as JIRA Issues

From RMsis 1.8.3.2-r290 onwards :

  • Administrator can specify a Prefix to the Title of Issue being exported.
  • Administrator can also specify, if the user can enable export of Requirements to multiple projects.

  • The type of issue to be created can be selected by the user while using the "Create JIRA Issue(s)" functionality. Administrator does not have to configure this. 

 

For Previous versions or RMsis (RMsis 1.8.3.1r286 and earlier)

  • Administrator can select the Issue Type to be created, when Requirements are exported as JIRA Issues. All possible / configured Issue Types will be listed in the options.
  • Administrator can specify  a Prefix to the Title of Issue being exported.
  • Administrator can also specify, if the user can enable export of Requirements to multiple projects.

Enable Baseline Deletion

If this option is enabled by the Administrator, then the Project Manager / a User with appropriate permissions will be able to delete a Baseline. Editing of Baselines is further explained in Project Configuration and Administration

Enable display of full name of Assignee

If this option is enabled by the Administrator, then full name of user will be displayed in the assignee field in the Planned Requirements/ Traceability view.

 

  • No labels